Technical drawing pen sizes
Technical drawing pens follow the same size-ratio principle as A series paper sizes, that is, an aspect ration of 1:√2, with the progression proceeding by folding the preceding size in two. When an A size piece of paper is folded in two it retains its proportions.
The standard sizes for technical drawings pens also differ by a factor √2, ie. 2.00 mm, 1.40 mm, 1.00 mm, 0.70 mm, 0.50 mm, 0.35 mm, 0.25 mm, 0.18 mm, 0.13 mm.
This means for example that after drawing with a 0.35 mm pen on A3 paper and reducing it to A4, you can continue with the 0.25 mm pen. (ISO 9175-1).
[edit] Related articles on Designing Buildings
- Drawing board.
- Manual drafting techniques.
- Notation and units on drawings and documents.
- Paper sizes.
- Rotring.
- Scale drawing.
- Shop drawings.
- Standard hatching styles for drawings.
- Symbols on architectural drawings.
- T-square.
- Technical drawing pen sizes.
- Types of drawing.
- Types of paper.
- Technical drawing.
- Working drawings.
Featured articles and news
A must-attend event for the architecture industry.
Caroline Gumble to step down as CIOB CEO in 2025
After transformative tenure take on a leadership role within the engineering sector.
RIDDOR and the provisional statistics for 2023 / 2024
Work related deaths; over 50 percent from constructuon and 50 percent recorded as fall from height.
Solar PV company fined for health and safety failure
Work at height not properly planned and failure to take suitable steps to prevent a fall.
The term value when assessing the viability of developments
Consultation on the compulsory purchase process, compensation reforms and potential removal of hope value.
Trees are part of the history of how places have developed.
The increasing costs of repair and remediation
Highlighted by regulator of social housing, as acceleration plan continues.
Free topic guide on mould in buildings
The new TG 26/2024 published by BSRIA.
Greater control for LAs over private rental selective licensing
A brief explanation of changes with the NRLA response.
Practice costs for architectural technologists
Salary standards and working out what you’re worth.
The Health and Safety Executive at 50
And over 200 years of Operational Safety and Health.
Thermal imaging surveys a brief intro
Thermal Imaging of Buildings; a pocket guide BG 72/2017.
Internally insulating a historical building
An experimental DIY approach using mineral thermal lime plaster.
Tree species selection for green infrastructure: A guide for specifiers.
The future of the Grenfell Tower site
Principles, promises, recommendations and a decision expected in February 2025.